LATUS BRAND (DENTAL PRODUCTS)

Matrix strips

Used in therapeutic dentistry for interdental separation in the formation of seals II, III and IV classes.

Composition and main characteristic

Made of PET film with a thickness of 50 microns. Prevent the formation of an adhesive layer in places isolated with a film.

 Package:

• 100 pcs in a container

REF 1540  Matrix strips

Light curing self etch bond

Use for enamel and dentine as bonding agent in dentistry.

Properties

Monotex made on the basis of a specially synthesized binder which are the basis BisGMA, HEMA and glutar aldehyde. The adhesive also contains an effective antiseptic detergent - benzalkonium chloride, 17% of a filler having a particle size of 0.4 microns and 15% multi component highly volatile solvent.

Monotex have a highly stable adhesion to phosphoric acid etched dentine and enamel with the properties as a binder, and due to the penetration of micro-particles of filler to dentinal tubules on a greater depth than just the unfilled liquid adhesive systems.

Package:

• 6 g bond in a bottle

REF 1823  Monotex self etch

Prophylactic fluoride releasing varnish

Use for fluoride caries prevention, removal of tooth hypersensitivity, as well as to prevent the living teeth, prepared under the denture.

Composition and main characteristic

One-component air drying varnish based on polymer film-forming. As an active agent contains a preparation of sodium fluoride and calcium fluoride, which contributes to the restoration of tooth enamel and protects teeth from the development of caries, eliminates the hypersensitivity of teeth.
It dries quickly, forming a thin, unpainted film. Does not require etching and polymerization. Preserved on the tooth surface for 2 to 5 days.

Package:

• 12 g varnish Ftoroplen in a bottle

REF 0531  Ftoroplen

Glass ionomer luting cement.

Use for restorative composite and amalgam liner, for desiduous teeth (I and II classes) in filling dentistry.

Composition and main characteristic

Prolonged release of fluoride ions provides a high anti-caries and antibacterial effect. Cement is radiopaque.

Package:

• 20 g powder Ionolat-BL
• 15 g liquid Ionolat-BL
• 10 g conditioner Ionolat-BL
• mixing pad
• measurer

REF 2001 Ionolat-BL

Light cure base liner.

Use as isolating and dempfing base liner under composites in  dentistry restorations.

Composition and main characteristic

Light cure base liner. Available in natural light brown without identification on the Vita scale. Depth of curing when exposed to light with a wavelength of 400-500 nm to 3 mm. Due to the special selection of components of the oligoether acrylate binder, the material has a high index to the pulp of the tooth, good adhesion to the dentin and elasticity.

Package:

• paste Reoliner-LC in a syringe
• 3 canulas

REF 2201 Reoliner-LC (2,2 g)

• paste Reoliner-LC in a syringe
• 5 canulas

REF 2202 Reoliner-LC (5,0 g)

Dual cure fixing cement

Fixalat dual is intended for permanent fixation of plastic and combined crowns, bridges made of polymer materials, as well as endodontic posts with a metal base.

Cement can also be used for the manufacture of temporary orthopedic structures.

Properties

Fixalat dual luting cement is a medium-filled, dual-curing material.

Fixalat dual has good fluidity and fixing properties, it is insoluble in the oral fluid, it releases fluoride. The strength properties of the hardened cement make it possible to provide both a reliable fixation of orthopedic structures and the necessary conditions for the removal of fixed elements of dentures in case of clinical need.

The resulting mixture maintains a working time of 1.5-2 minutes at a temperature of +18...+23 °C. The time of chemical polymerization from the start of mixing is 3.5-5 minutes.

Depth of curing during photopolymerization within 40 seconds, not less than 3 mm.

Package:

• 8.5 g paste in a automix syringe
• 5 mixing nozzles

REF 2606   FIXALAT Dual Auto mixing syringe

Etching gel

Use for creation of micro on enamel and short time on dentine surface in front of drawing bonding or sealant

Composition and main characteristic

The active etching component of the gel is 35 phosphoric acid solution The polymeric gelling agent thickens the gel smoothest the etching process and facilitates complete washout from the treated surface gel The gel provides an effective antiseptic detergent  benzalkonium chloride a colorant a stabilizer consistency

Package

4 g gel Soft tch in a syringe

canula

REF 0713  Soft tch

Liquid rubber dam.

Use for the isolation of soft tissues when teeth are whitened in cases of risk of irritation.

Composition and main characteristic

Liquid cofferdam is a light-curing material based on methacrylate resin.

Package:

• 3 g PeroxiDam
• 3 cannulas

REF 2203   PeroxiDam

Iodotemp 25 (Iodotemp 25) paste - for  acute and chronic periodontitis, by temporary filling (2-3 days) of the tooth canals in order to stop inflammation and disinfection. Manufacturer Latus (Ukraine).

Forms of release of Yodotemp 25:

- 3 g of pasta 

- 3 cannulas

REF 2705

Iodotemp 25 composition :

- iodoform 25%, camphor, thymol;

- zinc oxide and paste former.

Benefits of Yodotemp 25:

1. Iodotemp 25 is a plastic paste with a characteristic iodoform odor. The paste is applied by direct injection into the canal at the first or second visit, as appropriate, since it excludes the Iodotemp 25 pretreatment of the canals.

2. The paste does not harden, thanks to this, the treatment can be resumed during the next visit, eliminating the risk of making the canal inaccessible as a result of its complete and final filling.

How to use Iodotemp 25:

1. Open the pulp chamber, clean and expand the entrance to the canals, using liquid for

channel expansion or gel-like lubricant.

2. The gel lubricant is washed with warm water and dried with a weak jet of compressed air.

3. A small amount of Iodotemp 25 paste is introduced with a canal filler into the upper part of the canal, and then to the bottom of the cavity using a plugger; the layer thickness should be approximately 0.2 ... 0.5 mm. 

4. Remove excess paste and fill with temporary cement (dentin paste). 

5. At the next visit, remove the temporary filling, Iodotemp 25 paste and, if necessary, reapply or Iodotemp 25 finally fill the canal. 

Hemostatic agent

Use as a hemostatic agent in capillary bleeding from the gums and root canal in dentistry.

Composition and main characteristic

Hemalat forte prepared on the base of iron sulfate. Hemalat forte is well suited for hemostasis and control of gingival liquid in the case of fixing indirect adhesive restorations and treatment. In a short time it stops bleeding, removes the pollution caused by the circulation of gingival liquid, given by this an optimal bonding.

Very gentle action on the hard and soft tissue. Well washed off by water.

Package:

• 3 g gel Hemalat forte in a syringe
• canula

REF 2816   Hemalat forte

• 20 g liquid Hemalat forte in a bottle

REF 2817   Hemalat forte

 REF NO Package Details Price 2706 3 g paste 700

Light cure calcium hydroxide liner

Use at the deep caries treatment for protection of the pulp from bacterial, chemical, termal and mechanical influence in dentistry restorations. 

Composition and main characteristic

It is a ready-to-use fluid paste containing 38% by weight of calcium hydroxide. Cement has the ability to long-term maintenance of a high alkaline reaction (up to pH = 12), stimulates regeneration processes in the tissues of the tooth, and has a strong antimicrobial effect. The depth of curing when exposed to light with a wavelength of 400-500 nm for 40 s is 2 - 2.5 mm.

 Package:

• 2,2 g paste Replex-LC in a syringe
• 3 canulas

REF 2101 Replex-LC

Light cure restorative composite

Use for filling  of carious cavities of  I and II class and the opaque layer of all cavities restore the anatomical shape of the crown parts of teeth in therapeutic dentistry

Composition and main characteristic

THERAFIL31 highly filled microhybrid composite hardening by visible light with a wavelength of 400500 nm Depth of curing of THERAFIL31 by expose of illumination lamp 75Wt during 40 seconds is 46 mm

Seals from THERAFIL31 have low shrinkage stress high hardness and durability optimal transparency good color stability

Package

5  5 g paste in 4 colours

5 g bond

2  4 g 37  etching gel

20 microapplicators

5 canulas

REF 1701 THERAFIL31  colour 122335

REF 1702 THERAFIL31  colour 12332